Thickness Gauges

5 STEPs to accurate thickness measurements

Calibrate before you measure

Calibrate before you measure

Calibrate before you measure

Use Certified blocks
Verify the velocity of your material
Check zero offset regularly

Don't skip compensation

Calibrate before you measure

Calibrate before you measure

Use "Through Coating" mode or perform dual point calibration.
Know the paint thickness - guesswork fails audits

Confirm Couplant Consistency

Calibrate before you measure

Confirm Couplant Consistency

Apply evenly, especially on rough or curved surfaces.
Avoid air bubbles that create drop-outs

Scan Methodically

Document, don't Assume

Confirm Couplant Consistency

Mark you grid or scan path before starting
Keep probe pressure consistent
Use a small circular motion to avoid lift-off

Document, don't Assume

Document, don't Assume

Document, don't Assume

Record the probe used, date and calibration method
Add observations if readings are inconsistent
Store logs with traceability back to standards